How to fix USB device not recognized in Windows 10? The error message is "The last USB device you connected to this computer malfunctioned, and Windows does not recognize it." This is the most common USB problems for many users who using Windows 10 system computer. On the following guide we will list the best solution to solve USB device not recognized errors. Different types of problems may arise when using drives on Windows 10 and some of them are:
Problems about USB device not recognized windows 10:
External hard drive not recognized by Windows 10: This problem often affects both the external hard drive and the flash drive and to resolve both issues, you can apply the same method.
USB may not be detected by Windows 10: Another very common problem is when your Windows 10 software can’t seem to detect your USB flash when plugged in.
USB hard drive not showing: Some users complain that when they connect their drives to their computer, it doesn’t display on the screen. This problem is not without a solution.
USB drive not working: You drive may show on your screen but may not function. Such a problem is not peculiar to you alone as many other users of Windows 10 complain of the same problem.
Windows USB port non-functional: If your USB port is not functioning, there’s no way you can transfer data from one source to the other. You can resolve all the problems highlighted in this article using our tested and trusted technical solutions.
Part 1. How to fix a Windows 10 doesn’t recognize USB Port
Solution 1 – Check Power Management for USB root Hub
One way to fix a Windows 10 problem of this spec is to tweak the power management structure of your USB root hub. Here is how to go about it.
Open you Device Manager and go to the section “Universal Serial Bus Control” to find the USB Hub. For multiple USB Root Hub, you have to repeat the procedure for each of them (Three USB Root Hub).
Right click the USB Root Hub/select Properties.
Proceed to the Power Management tab. Uncheck “Allow the computer to turn off this device to save power”.
Save changes and repeat these steps for all Root Hubs on your device Manager.
Solution 2 – Install drivers for Generic USB Hub
Open your Device Manager and look for the Generic USB Hub. Right click the icon to update the driver.
Select “Browse my PC for driver for driver software”.
Select “Let me pick from a list of drivers on my PC”
Choose Generic USB Hub and tap the Next button.
To get the very best results, you can conduct these same steps for all the Universal Bus Controllers on your Device Manager.
Solution 3 – Change USB Selective Suspend Settings
Another option you can try when experiencing USB not recognized Windows 10 problems is to change the USB selection suspend settings. Here is how to go about effecting changes.
Open Control Panel and choose Power Options.
Click "Change Plan Setting" on the Power Saver section
Then click "Change advanced power settings"
Find the USB Setting option, then select "Disable"
Solution 4 – Reconnect your USB devices
When you try to connect the USB ports to the computer and get the error message pop up, you might want to reconnect your USB devices. This action may solve your USB device not recognized problem in Windows 10.
Part 2. How to Fix Windows 10 doesn’t Recognize USB Drive/Storage
If the problem you are experiencing has to do with your Windows 10 application not recognizing the USB drive or storage you used, follow these steps to rectify the problem.
Solution 1 – Turn off Fast Startup
Go to Control Panel and select Power options
Then click on Choose what the power button does
By click Change settings that are currently unavailable
Then uncheck Turn on fast startup(recommend) option and click on Save Changes
Solution 2 – Update your drivers / install the default driver
If you get the USB device not recognized error, you may need to uninstall your currently installed drive. You can follow the next steps to allow Windows 10 to install the default drive:
Go to Device Manager windows by pressing Windows Key + X or search the keyword on the search bar.
Select Disk drives option, then right-click on your USB device and select Uninstall device
Restart your computer after driver has being uninstalled
Reconnect your USB drive when your PC starts.
Solution 3 – Partition your USB storage and assign letter to it
While you connect the USB device to the Windows 10 computer, the device need to partition and assign a letter to it. Follow these steps to do that:
Hold down the Windows + S key, type in the word “Computer management” and pick computer management from the options provided.
Once computer management comes up, click on Disk management.
Find your hard drive (To do so, check through the sizes of drives in your drive management system)
If your drive is not partitioned, you will see at least one drive in particular with an unallocated space to it. Right click the icon and pick the item “New simple volume”. Now follow these steps to partition it.
On the Disk Management window and find youe USB hard drive, righ-click on the drive and select Change Drive Letter and Paths
Click on Add and make sure you assign a particular letter to the partition.
*Do note that your Windows 10 only works with NTFS & FAT32 systems so during the process of partitioning, only use an NTFS system file.
*Also note that you can also partition your hard drive using any third party app.
Solution 4 – Uninstall hidden devices from Device Manager
If your USB device not recognized Windows 10 problems can be caused by devices that hidden in your Device Manager. To get it working again you may need to uninstall them. Follow these instructions to do that.
Press your keyboard Windows key + R and input the letters “cmd” and press OK.
Once the command prompt comes up, paste these lines below and click ok after each line to run them through.
- set devmgr_show_nonpresent_devices=1
- cd windowssystem32
- start devmgmt.msc
After doing this, your Device Manager will be able to fully display hidden devices in your drive
Expand all the sections and make sure you delete all gray entries
Restart your computer and reconnect your hard drive.
Solution 5 – Delete Unrecognized device from Device Manager and assign different letter to your USB hard drive
To delete unrecognizable devices from your Device Manager and assign a letter to it, follow these steps.
Go to the Universal Serial controller after opening your system’ Device Manager.
Expand the Controller section and locate all Unrecognized devices. On the Unrecognized devices, Right-click to pick the item “uninstall device”.
Press the scan button to scan for available hardware changes.
Close your Device Manager
Select your computer management portal and navigate to Disk management by pressing Windows key + S
Locate your USB hard drive storage and right click to pick “Change system’s hard Drive Letter and Paths”
Press the Change button and assign a letter to the USB drive.
Should you not see any unrecognized devices in your Manager, skip the last step and just try replacing the old letter with a new one.
Solution 6 – Connect your USB hard drive to the USB ports in the back
If you are having issues with a USB drive such as the Seagate modeled USB drive it may be as a result of the fact that you connect yours to the front port rather than the back. You may also experience the same problem of an unrecognizable hard drive even if you don’t make use of a hard drive that is like Seagate's. There are claims that some ports don’t have enough power are the front of computer systems. If this claim is true, you may want to consider connecting your hard drive to the back port to see of it works. Also avoid using a hub for connection. It is better when you connect directly.
Solution 7 – Replace the hard drive letter using the Diskpart tool
Another way to replace the hard drive letter is to use a Diskpart tool. Here is how to use it to correct a USB device not recognized Windows 10 problem.
Type dispart on the run box by pressing Windows Key + R.
Once the command prompt opens up, type the list volume then tap the Enter key to run command.
Identify your exact USB storage file amongst the list.
We advise you choose “Select Volume 2” because it is much easier to use this prompt. Tap Enter to proceed.
Close the command prompt and see if your hard drive is recognizable
USB device not recognized Windows 10 may be as a result of undetected external hard drives, your drive not showing or may not even work at all. These problem can be resolved however with any of the 7 solutions listed above. One solution may work but in some cases, you may have to use more than one solution to resolve issues. The more suggestion that you should backup your USB data to a safe device or it will cause your data files get lost. Once data loss happens, you need a USB data recovery program to help you retrieve all data back easily.
Recover lost data files from USB drive on Windows 10 easily.
Data recovery from any storage device on Windows computer and Mac.
Recover lost data files due to Windows computer crashed.
- Recover USB Drive
- Format USB Drive
- Fix/Repair USB Drive
- Know USB Drive